• cappasity:faba53ee-8969-4000-8d15-6b866303a7b2


• Precise temperature control with PID. Wax tank temperature and inject (nozzle) temperature are separately controlled.

• With TOUCH SCREEN, it’s very easy to set the parameters(press 1&2,time,clamp,forward and hold ). 

• 100 programs of parameters can be stored.

• DWT 1 is very simple to operate. With 10-hot key, each program can be chosen immediately and all parameters will be show on TOUCH SCREEN.

• AUTO CLAMP unit is designed for large size rubber mold, with maximum mold dimension W100 x D120 x H60 mm.

• ON/OFF Timer can be adjusted as required.

PO-10-DWT 1

Power Source
220V 50Hz + Ground
Wax Capacity
2kg Of Wax
Working Temperature
120°C (Boiler) 85°C (Inject)
Vacuum Pump
42L / Min 220V 1/4HP (Option)
Temperature Accuracy
± 1 °C
Air Pressure
6-8kg / Cm²
Overall Dimention
W610 x D430 x H480mm
Touch Screen 4.3 Inch Wide
100  Programs
Clamp Dimention
W220 x D170 x H375mm
Inject Pressure
0-2kg / Cm²
Maximum Mold Dimention
W100 x D120 x H60mm
Clam / Forward Pressure
1-6kg / Cm²
Inject Time
0-999 Sec
Clamp Hold
0-999 Sec
Vacuum Time
0-999 Sec